Calculate the display area from a diagonal
Enter the screen diagonal in inches and the panel's native horizontal and vertical pixel dimensions. Choose Calculate screen size to obtain width and height in centimeters, rectangular area in square centimeters, total pixels, pixels per inch (PPI) and pixel pitch in millimeters.
Use the panel resolution from its specifications. A browser viewport, operating-system scaling value or desktop resolution selected below the native resolution is not an equivalent input. Editing any field clears the previous result, so the output never represents an earlier set of inputs.
Example with a 27-inch QHD screen
Choose Use 27-inch QHD example to replace the current inputs with 27 inches, 2560 horizontal pixels and 1440 vertical pixels. Then calculate. The display area is approximately 59.77 cm wide and 33.62 cm tall, with 108.79 PPI, 3,686,400 pixels and a pixel pitch of approximately 0.233 mm.
To compare this screen with another model, use Monitor Compare. Its side-by-side drawing uses the same calculation for every selected screen.
Formulas and units
Let d be the diagonal in inches, w the horizontal pixel count, and h the vertical pixel count. The pixel diagonal is sqrt(w² + h²).
- PPI =
sqrt(w² + h²) / d. - Width in cm =
2.54 × d × w / sqrt(w² + h²). - Height in cm =
2.54 × d × h / sqrt(w² + h²). - Area in cm² = width × height.
- Total pixels =
w × h. - Pixel pitch in mm =
25.4 / PPI.
Calculations retain precision internally and round only displayed values. The supported diagonal is 1–200 inches and each pixel dimension must be a whole number between 1 and 32,768. Empty, zero, negative and nonfinite values cannot produce a result.
Limits of a calculated size
The model assumes a flat rectangular screen with square pixels. It excludes bezels, stands and cabinet depth, and it does not model the chord of a curved display or rounded corners. Use the manufacturer's physical dimensions when checking desk fit.
PPI describes how closely pixels are packed. It does not measure color accuracy, brightness, contrast, response time or whether a particular viewing distance is comfortable. The diagram shows proportions, not actual physical size on your device.




