Microphone Test

Check microphone activity with a live RMS input meter. Start and stop browser access explicitly; this test does not save or upload a recording.

Press Start, allow microphone access, speak at a normal volume and watch the meter. Stop releases the microphone.

0.0%

This is a relative RMS amplitude percentage, not calibrated decibels or a pass/fail score. No recording is saved, uploaded or played through your speakers.

Microphone Test

Check microphone activity with a live RMS input meter. Start and stop browser access explicitly; this test does not save or upload a recording.

How to use the tool

  1. Start the microphone test and approve browser permission.
  2. Speak, pause and compare the meter with a quiet moment.
  3. Select Stop when finished; hiding or leaving the page also releases the input.

Example and interpretation

Speaking close to the selected microphone should move the meter more than silence. Repeat the same phrase at another distance to compare input activity.

Limits

The percentage is RMS digital sample amplitude ×100, capped at 100. It is not calibrated decibels or sound pressure. Browser gain, noise suppression and system input selection affect the reading.

Troubleshooting

For a flat meter, check hardware mute, browser permission and the operating-system input device. A permission granted after Stop will not reactivate the cancelled test.

Frequently asked question

Can this measure acoustic decibels?

No. The samples lack a calibrated microphone sensitivity and acoustic reference. Use the meter to confirm activity under consistent settings.

To listen to a saved sample instead of watching a meter, use Microphone Playback Test.