Sphere Calculator: measurements and units
Calculate sphere diameter, volume and external surface area from a positive radius using standard geometric formulas. Enter the radius, not diameter. Volume uses cubic units and surface area uses square units.
Enter your measurements
Enter the centre-to-surface length in Radius, then choose Calculate. The example button replaces these inputs with the case below. Use a decimal point or exponent notation such as 1e3, without unit suffixes or thousands separators.
Each dimension must be positive, from 0.000000001 to 1,000,000,000. A radius in metres gives diameter in metres, surface area in square metres and volume in cubic metres. No automatic unit conversion is performed.
Worked example
For radius 3, diameter is 6, volume is approximately 113.097335529 cubic units, and surface area is approximately 113.097335529 square units. Their numerical equality here does not make the units interchangeable.
Formula and interpretation
Diameter = 2r, volume = 4πr³/3, and surface area = 4πr². Doubling the radius multiplies surface area by four and volume by eight.
Limits and common mistakes
This models a full ideal sphere. It does not calculate a spherical cap, hemisphere, hollow shell or ellipsoid. If measuring a ball across its widest point, halve that diameter before entering the radius.
Answers use 12 significant digits of floating-point precision; this does not improve measurement accuracy. Copy results copies the displayed measurements. Recalculate after edits.
For a related calculation, open Circle Calculator.





