Electricity Cost Calculator

Estimate energy use and cost from appliance watts, operating hours, number of days and your own price per kWh.

Assumes constant power while running: kWh = watts ÷ 1,000 × hours. Enter your own energy rate in one currency per kWh. Fixed charges, taxes, tiered tariffs and standby consumption are not included.

Calculations stay in this browser. Inputs are not uploaded or saved.

Estimate appliance energy use from operating power

Enter Operating power (watts), Operating hours per day, Number of days and Price per kWh, then select Calculate. The result separates daily energy, total energy and the estimated usage charge. Enter the rate in your chosen currency; the tool does not infer a country, currency, tariff or billing plan.

Example: a 1,000 W load for two hours a day

Load the example to use 1,000 W, two hours per day, 30 days and a price of 0.20 per kWh. The daily energy is 1000 / 1000 × 2 = 2 kWh. Over 30 days that is 60 kWh, giving an energy charge of 12 currency units. The 30 days and 0.20 rate are demonstration inputs, not a default month or a recommended tariff.

Why measured and rated power differ

The calculation assumes a constant entered power for every operating hour. Heating and cooling equipment can cycle on and off; computers and other electronics vary with workload. A nameplate rating may describe a maximum rather than an average. Use a measured average or a documented consumption estimate for the operating condition you intend to model.

Standby time is not automatically included. Calculate it separately using standby watts and the remaining hours if it matters. Hours must be between zero and 24 per day, and days between zero and 3,660. Blank values are rejected; enter zero explicitly when the scenario genuinely has no usage or no usage charge.

What this estimate leaves out

The output does not apply fixed connection fees, taxes, fuel adjustments, tier thresholds, time-of-use prices, export credits or minimum charges. If different hours use different prices, calculate each period separately and add the resulting charges. This tool is not a reading of your electricity meter or a forecast of your entire bill.

Results use up to ten significant digits and remain editable without sending input to a server. Changing an input clears the previous calculation. Use Unit Converter for supported unit conversions, or Product Compare to keep appliance specifications alongside your own estimates.