Gamepad Stick Drift Test

Observe raw resting controller axes and the first stick’s distance from center. Compare repeated readings without an invented pass/fail threshold.

Observe raw controller axes and the first stick’s distance from center while your hands are off the controls.

Gamepad Stick Drift Test

Observe raw resting controller axes and the first stick’s distance from center. Compare repeated readings without an invented pass/fail threshold.

How to use the tool

  1. Connect, start and press a controller button.
  2. Release the sticks and inspect axes zero and one.
  3. Move the stick in a circle, release and compare resting samples.

Example and interpretation

For x=0.03 and y=0.04, magnitude=sqrt(x²+y²)=0.05. This is a raw distance-from-center value, not an automatic failure.

Limits

The first two axes are treated as the first stick; unusual mappings differ. Firmware, calibration and game dead zones affect practical behavior. No calibration or universal drift threshold is applied.

Troubleshooting

Compare several hands-off samples with another application and the game’s dead-zone configuration. A single return-to-center event is insufficient evidence.

Frequently asked question

Does any nonzero value prove a defect?

No. The browser may expose small resting values that a game intentionally filters through a dead zone.

Technical reference

Gamepad values and controller mapping — MDN.

For all exposed button and axis values, open Gamepad Test.